Collaboration

Partnerships for research, development, and technology transfer – from collaborative projects to tailored innovation solutions.

About SAL

Insights into SAL’s mission, values, research activities, and contribution to Europe’s innovation ecosystem.

5Gearing

5GEARING aims to develop guide­lines on the deploy­ment of 5G campus network for manu­fac­turing indus­tries targeting local and rural regions. Using these guide­lines, the project targets the demon­stra­tion of the 5G system capa­bil­i­ties in an indus­trial envi­ron­ment with defined traffic profile of an indus­trial use case. 5GEARING contributes to expanding the 5G network ecosystem from trial to launch involving customers, vendors, service providers, inte­gra­tors, and acad­emia.

Project goals

The digital trans­for­ma­tion of Industry 4.0 is led by the automa­tion of manu­fac­turing processes. Indus­trial appli­ca­tions are quite hetero­ge­neous and place different demands on the commu­ni­ca­tion system. Recently, the trans­for­ma­tion to Industry 5.0 has also been initi­ated, which empha­sizes the involve­ment of humans in the increas­ingly auto­mated phys­ical processes. At the same time, 5G wire­less tech­nology is evolving to support highly diverse and hetero­ge­neous envi­ron­ments for various appli­ca­tions.

The 5G wire­less tech­nology promises to provide connec­tivity for the Indus­trial Internet of Things scenarios due to its support for deter­min­istic and highly reli­able low-latency commu­ni­ca­tions. However, the require­ments of indus­trial appli­ca­tions can be partic­u­larly demanding and need to be care­fully analyzed. Not only is low latency commu­ni­ca­tion required, but some­times high device density, high data rates, posi­tioning, and auto­mated service provi­sioning are desired. In addi­tion, edge computing and arti­fi­cial intel­li­gence with data-driven system design open up new dimen­sions for process opti­miza­tion. These tech­no­log­ical advances need to be tested and deployed to support the vision of Industry 5.0.

The overall goal of 5GEARING is to develop 5G network deploy­ment scenarios for indus­trial appli­ca­tions by addressing issues such as coverage plan­ning, inter­fer­ence avoid­ance, secu­rity, and safety.

Project goals

  • Develop guide­lines for the deploy­ment, config­u­ra­tion, and eval­u­a­tion of 5G campus networks for indus­trial appli­ca­tions, involving customers, vendors, service providers, and inte­gra­tors.
  • Work with industry to under­stand and develop solu­tions for inno­v­a­tive use cases.
  • Address 5G network deploy­ment issues such as secu­rity, safety, trust­wor­thi­ness, etc.
  • Develop smart ways to plan coverage and avoid inter­fer­ence.
  • Estab­lish a 5G campus network as a show­case for the manu­fac­turing industry, consid­ering forward-looking spec­trum expan­sion in rural areas and support from oper­a­tors and service providers.

Project
facts

Title: 5GEARING
Program: Breit­band Austria 2030 – GigaApp
Funding Bundes­mi­nis­te­rium für Finanzen, FFG
Dura­tion: May 2023 – October 2024

Similar Projects

Discover more projects with similar focuses and technologies.

NanoMacs

Within the „NanoMacs“ project, nanocrystalline magnetic materials are to be used instead of conventional (ferrite) materials for various electromagnetic components in order to improve the performance of power converters in terms of efficiency and power density….

ALL2GaN

The aim of this project is to strengthen the European power electronics industry by offering an EU-originating intelligent GaN integration toolbox as a basis for applications with significantly increased material and energy efficiency. This will help meet global energy demand while simultaneously minimizing the CO2 footprint.

Tiny Power Box 2

In the „Tiny Power Box 2“ project, the focus, as in the predecessor project „Tiny Power Box 1“, is on a further increase in the power density of charging devices for e-cars, so-called on-board chargers. The renewed goal is to further reduce weight and size. With the latest semiconductor technologies and optimized topology, as well as targeted thermo-mechanical optimization, the new on-board charger is intended to come even closer to an industrializable prototype...

Contact

Business Development
Dipl.-Ing. Stefan Wimmer
Business Development Intelligent Wireless Systems
Linz
Project Manager
Dr. Raheeb Muzaffar
Senior Scientist Wireless Communications
Linz

Newsletter

Our Science & Stories newsletter provides the latest news, bietet aktuelle Neuigkeiten, Forschungshighlights und spannende Einblicke
von Silicon Austria Labs – direkt ins Postfach.