Laser welding system

  • Manufacturer: Alphalaser
  • Model: ALP 35S

General Description:

Laser welding system to weld metal parts. Not to be used with plastic specimen! Chamber is flushed with Argon during welding process. The system is water-cooled and the tank has to be refilled regularly to allow safe operation – its filling level is monitored by the system which goes into a fail-safe mode if this level drops below a minimum threshold.


Key Specifications:

  • Welding spot diameter: 0.2 – 2mm
  • Charging Lamb voltage: 180 – 450V
  • Charging Lamb pulse duration: 0.1 – 10ms
  • Pulse frequency: 0.1 – 9.9 Hz
  • Cooling water level is monitored.
  • Argon gas supply can be activated but is not necessary for welding operation.


Use allowed for all researchers with permission


Environmental Lab
Europastraße 12
9524 Villach

Responsibles / Contact

Dr. Jochen Bardong / Bernd Koschier
Tel.:+43 4242 56300 209 / 268